Crystal Serum Light is the prosumer version of the world-famous Gtechniq Accredited Detailer Crystal Serum Ultra. Offering 80% of the performance of the professional Serum Ultra, Crystal Serum Light is designed to provide top-tier paint protection for your vehicle, without going to a detail shop. This advanced ceramic coating enhances gloss, resists swirls, and repels contaminants and dirt. If applied incorrectly, it can be machine polished from your vehicle’s paintwork, ensuring it is user-friendly for first-time users and professionals.
When it comes to adding gloss, resisting swirls, and providing contaminant and dirt repellency, Gtechniq Crystal Serum Ultra and Serum Light are the leaders in vehicle paint protection. Crystal Serum Light offers unmatched protection for your car’s paint, helping to maintain its pristine condition and enhance its resale value. Whether you’re protecting a new car or a used one, Crystal Serum Light is your go-to solution for immaculate paint protection.
The product forms a high-gloss, durable protective film that shields against bird droppings, acid rain, road debris, and other environmental contaminants, keeping your used or new vehicle looking its best for years to come. With Crystal Serum Light, you can keep paint damage at bay.
Simple steps to help you get the best results out of this car interior cleaning product
Using a new product on your vehicle may cause some hesitation, and our team understands that. However, at Gtechniq, we make the application process simple and effective. To get the best results from Crystal Serum Light, follow these steps:
-
To apply Crystal Serum Light (CSL), make sure your vehicle is indoors and can stay indoors for 12 hours after application. Do not apply in direct sunlight.
-
Only apply the product at a temperature between 5°C and 25°C.
-
Shake well and wear gloves.
-
Wash and decontaminate your paintwork thoroughly prior to application. If required, polish your paintwork, either by machine or hand, to remove any imperfections. We recommend starting with a ceramic coat to prevent interference of debris throughout the process
-
Spray Panel Wipe into a Gtechniq MF1 Microfibre Cloth and wipe down each panel in small sections.
-
Soak the application pad with 3 full measures of CSL from the pipette and work the liquid into the pad to get an even saturation.
-
Replace the lid on the bottle and set aside – do not keep the bottle in your hand as this promotes premature curing.
-
Apply in overlapping strokes to an area roughly 2ft by 2ft, or work to the body lines of the vehicle.
-
Immediately remove residue with an MF1 cloth – you may need to buff the same area several times, but avoid doing it with too much force. We recommend the use of 2 cloths at any one time. Make sure the cloths are rotated during residue removal to prevent CSL curing in the cloth – this can make buffing residue difficult.
-
Inspect the surface for residue with a bright, diffused light source.
-
If you remove residue and it cures fully, you should polish the area and reapply CSL.
-
As soon as you finish, put your MF1 cloths in water, wash, and dry them as soon as possible.
-
Wait approximately 2 hours after applying CSL to apply EXO Ultra Durable Hydrophobic Coating or C2 Liquid Crystal.
-
Store in a cool, dry place.
-
Use within 3 months of opening.
